F30026FileReset

F30026 File Reset

Minor Business Rule

Object Name: N3002050

Parent DLL: CMFGBASE

Location: Client/Server

Language: NER

Data Structure

D3002050 - F30026 File Reset

Parameter NameData ItemData TypeReq/OptI/O/Both
mnIdentifierShortItemITMMATH_NUMERICNONENONE

An inventory item number. The system provides three separate item numbers plus an extensive cross-reference capability to other item 
numbers (see data item XRT) to accommodate substitute item numbers, replacements, bar codes, customer numbers, supplier numbers, and 
so forth. The item numbers are as follows:   o Item Number (short) - An eight-digit, computer-assigned item number     o 2nd Item Number - The 
25-digit, free-form, user defined alphanumeric item number     o 3rd Item Number - Another 25-digit, free-form, user defined alphanumeric item 
number

szCostCenterAltMMCUcharNONENONE

A code that represents a high-level business unit. Use this code to refer to a branch or plant that might have departments or jobs, which 
represent lower-level business units, subordinate to it. For example:     o Branch/Plant (MMCU)     o Dept A (MCU)     o Dept B (MCU)     o Job 123 
(MCU) Business unit security is based on the higher-level business unit.

szLocationLOCNcharNONENONE

The storage location from which goods will be moved.

szLotLOTNcharNONENONE

A number that identifies a lot or a serial number. A lot is a group of items with similar characteristics.

szCostTypeCOSTcharNONENONE

A code that designates each element of cost for an item. Examples of the cost object types are:   o  A1  Purchased raw material   o  B1  
Direct labor routing rollup   o  B2  Setup labor routing rollup   o  C1  Variable burden routing rollup   o  C2  Fixed burden routing rollup   o  Dx  Outside 
operation routing rollup   o  Xx  Extra add-ons, such as electricity and water  The optional add-on computations usually operate with the type 
Xx extra add-ons. This cost structure allows you to use an unlimited number of cost components to calculate alternative cost rollups. The 
system then associates these cost components with one of six user defined summary cost buckets.

szLedgTypeLEDGcharNONENONE

A user defined code (40/CM) that specifies the basis for calculating item costs. Cost methods 01 through 19 are reserved for J.D. Edwards 
use.

mnAmtStdMfgCostSimXSMCMATH_NUMERICNONENONE

Used to calculate cost during the simulation process.

mnAmtStdRollupSimXSCRMATH_NUMERICNONENONE

For the designated cost method, used to calculate the cost of all the lower levels during the simulation process.

szUserIdUSERcharNONENONE

The code that identifies a user profile.

jdDateUpdatedUPMJJDEDATENONENONE

The date that specifies the last update to the file record.

mnTimeOfDayTDAYMATH_NUMERICNONENONE

The computer clock in hours:minutes:seconds.

szWorkStationIdJOBNcharNONENONE

The code that identifies the work station ID that executed a particular job.

cSuppressErrorMessageSUPPScharNONENONE

A flag indicating whether or not runtime error messaging will occur when an error message is issued from a business function.        0 = allow 
runtime error message handling.        1 = suppress runtime error message handling.

szDataItemDTAIcharNONENONE

A code that identifies and defines a unit of information. It is an alphanumeric code up to 8 characters long that does not allow blanks or 
special characters such as %, &, or +. You create new data items using system codes 55-59. You cannot change the alias.

cStandardProcessingFlagPFLGcharNONENONE

A processing code to indicate the item is currently acitve in the simulation process.    Blank Inactive    1     Active 

szLotGradeLOTGcharOPTNONE

A code that indicates the grade of a lot. The grade is used to indicate the quality of the lot. Examples include the following:    A1   Premium 
grade    A2   Secondary grade  The grade for a lot is stored in the Lot Master table (F4108).

mnAmtCurrentStandardUntSTDCMATH_NUMERICOPTNONE

The cost of the item as calculated by the Simulate Cost Rollup program (P30820) and updated by the Frozen Cost Update program 
(P30835). You can also manually maintain this cost.

mnStandardCostRollupCSLMATH_NUMERICOPTNONE

The accumulated standard cost rolled up from lower levels.

szStandardFactorCodeFroSCTCcharOPTNONE

A code used to retrieve factor information from the Generic Rate File (F00191).    System Code 30    Record Type CF 

szStandardFactorCodeSimXSFCcharOPTNONE

A user defined code (system 30, type CF) used to retrieve factor information from the Generic Rate table (F00191). This value is used in 
conjunction with the Rate Code and Rate Amount fields to calculate extra costs (electricity,taxes, tooling changes, and so on).

mnStandardFactorFrozenSTFCMATH_NUMERICOPTNONE

A generic factor number used to calculate data.

mnStandardFactorSimXSFMATH_NUMERICOPTNONE

A generic factor used to calculate data for standard cost component extras.

szStandardRateCodeFroRATScharOPTNONE

A code used to retrieve rate information from the Generic Rate File (F00191).        System Code 30                 Record Type CR

szStandardRateCodeSimXSRCcharOPTNONE

A user defined code (system 30, type CR) used to retrieve rate information from the Generic Rate table (F00191). This value is used in 
conjunction with the Factor Code and Factor Amount fields to calculate extra costs (electricity, taxes, tooling changes, and so on).

mnStandardRateFrozenRTSDMATH_NUMERICOPTNONE

A code used to define rate information in the Generic Rate File (F00191).

mnStandardRateSimXSRMATH_NUMERICOPTNONE

A generic rate used to calculate extra costs, such as electricity and taxes.

szProgramIdPIDcharOPTNONE

The number that identifies the batch or interactive program (batch or interactive object). For example, the number of the Sales Order Entry 
interactive program is P4210, and the number of the Print Invoices batch process report is R42565. The program ID is a variable length value. 
It is assigned according to a structured syntax in the form TSSXXX, where: T The first character of the number is alphabetic and identifies the 
type, such as P for Program, R for Report, and so on. For example, the value P in the number P4210 indicates that the object is a 
program. SS The second and third characters of the number are numeric and identify the system code. For example, the value 42 in the number P4210 
indicates that this program belongs to system 42, which is the Sales Order Processing system. XXX The remaining characters of the numer are 
numeric and identify a unique program or report. For example, the value 10 in the number P4210 indicates that this is the Sales Order Entry 
program.

cModeEV01charOPTNONE

An option that specifies the type of processing for an event.

sz2ndItemNumberLITMcharOPTNONE

A number that identifies the item. The system provides three separate item numbers plus an extensive cross-reference capability to 
alternative item numbers. The three types of item numbers are: Item Number (short) An 8-digit, computer-assigned item number. 2nd Item Number A 
25-digit, user defined, alphanumeric item number. 3rd Item Number  Another 25-digit, user defined, alphanumeric item number. In addition to 
these three basic item numbers, the system provides an extensive cross-reference search capability. You can define numerous 
cross-references to alternative part numbers. For example, you can define substitute item numbers, replacements, bar codes, customer numbers, or 
supplier numbers.

sz3rdItemNumberAITMcharOPTNONE

The system provides three separate item numbers plus an extensive cross-reference capability to alternate item numbers. These item 
numbers are as follows: 1.  Item Number (short) - An 8-digit, computer-assigned item number. 2.  2nd Item Number - The 25-digit, free-form, user 
defined alphanumeric item number. 3.  3rd Item Number - Another 25-digit, free-form, user defined alphanumeric item number.  In addition to 
these three basic item numbers, an extensive cross-reference search capability has been provided (see XRT). Numerous cross references to 
alternate part numbers can be user defined, such as substitute item numbers, replacements, bar codes, customer numbers, or supplier 
numbers.

Related Functions

None

Related Tables

None