F1381ProcessFilters

Minor Business Rule

Object Name: B1300840

Parent DLL: CCRIN

Location: Client/Server

Language: C

Data Structure

D1300840 - F1381ProcessFilters

Parameter Name	Data Item	Data Type	Req/Opt	I/O/Both
szEquipmentGroup	EQGP	char	REQ	INPUT
The name corresponding to a particular equipment group to be analyzed.
szEquipmentSubGroup	EQSP	char	REQ	INPUT
The name corresponding to a particular equipment subgroup, which is in an equipment group, to be analyzed.
cIncludeChildren	ICLC	char	OPT	BOTH
A code that specifies whether you want children (components) to be included with their associated parent equipment. Valid values are: On: include both children and parent equipment. Off: Do not include children of parent equipment.
szCompany	CO	char	OPT	BOTH
A code that identifies a specific organization, fund, or other reporting entity. The company code must already exist in the Company Constants table (F0010) and must identify a reporting entity that has a complete balance sheet. At this level, you can have intercompany transactions. Note: You can use company 00000 for default values such as dates and automatic accounting instructions. You cannot use company 00000 for transaction entries.
szCostCenter	MCU	char	OPT	BOTH
An alphanumeric code that identifies a separate entity within a business for which you want to track costs. For example, a business unit might be a warehouse location, job, project, work center, branch, or plant. You can assign a business unit to a document, entity, or person for purposes of responsibility reporting. For example, the system provides reports of open accounts payable and accounts receivable by business unit to track equipment by responsible department. Business unit security might prevent you from viewing information about business units for which you have no authority.
szCostCenterLocation	LOC	char	OPT	BOTH
The current physical location of an asset. The location must have a valid business unit or job number in the Business Unit Master table (F0006).
mnAddressNumber	AN8	MATH_NUMERIC	OPT	BOTH
A number that identifies an entry in the Address Book system, such as employee, applicant, participant, customer, supplier, tenant, or location.
mnAddressNumberLessor	LANO	MATH_NUMERIC	OPT	BOTH
The address book number for the lessor, renter, or lending institution.
szEquipmentStatus	EQST	char	OPT	BOTH
A user defined code (12/ES) that identifies the equipment or disposal status of an asset, such as available, down, or disposed.
szProductModel	PRODM	char	OPT	BOTH
A code that classifies an inventory item into a model for customer service. Some examples include: Laser Printer, Inkjet or Fax.
szProductFamily	PRODF	char	OPT	BOTH
A code that classifies an inventory item into a group for customer service. Some examples include: Laser Printer, Inkjet, or Fax.
szCostCenterAlt	MMCU	char	OPT	BOTH
A code that represents a high-level business unit. Use this code to refer to a branch or plant that might have departments or jobs, which represent lower-level business units, subordinate to it. For example: o Branch/Plant (MMCU) o Dept A (MCU) o Dept B (MCU) o Job 123 (MCU) Business unit security is based on the higher-level business unit.
mnAssetItemNumber	NUMB	MATH_NUMERIC	OPT	BOTH
An 8-digit number that uniquely identifies an asset.
szMajorClass	ACL1	char	OPT	BOTH
A user defined code (12/C1) that determines the accounting class category code. You use this accounting category code to classify assets into groups or families, for example, 100 for land, 200 for vehicles, and 300 for general office equipment. J.D. Edwards recommends that you set up major class codes that correspond to the major general ledger object accounts in order to facilitate the reconciliation to the general ledger. Note: If you do not want to use the major accounting class code, you must set up a value for blank in the user defined code table.
szSubClass	ACL2	char	OPT	BOTH
A user defined code (12/C2) that is used to classify assets into groups or families. You use the equipment category code as a subclass to further define the accounting class, for example, 310 for copy equipment, 320 for projectors,and 330 for typewriters within the accounting class for general office equipment. Note: If you do not want to use the major equipment class, you must set up a value for blank in the user defined code table.
szClassCode3	ACL3	char	OPT	BOTH
A user defined code (12/C3) that classifies assets into groups or families. You use the manufacturer category code to further define subclass codes. For example, you can define an International Harvester, single-axle within the subclass for trucks.
szClassCode4	ACL4	char	OPT	BOTH
A user defined code (12/C4) that classifies assets into groups or families. You use the model year category code to further define the subclass codes. For example, you can define a 1990 International Harvester, single-axle within the subclass for trucks.
szClassCode5	ACL5	char	OPT	BOTH
A user defined code (12/C5) that classifies assets into groups or families. You use the usage category codes to further define the subclass codes.
szClassCode6	ACL6	char	OPT	BOTH
A user defined code (12/C6) that classifies assets into groups or families. You use this code to further define the subclass codes.
szClassCode7	ACL7	char	OPT	BOTH
A user defined code (12/C7) that classifies assets into groups or families. You use this category code to further define the subclass codes.
szClassCode8	ACL8	char	OPT	BOTH
A user defined code (system 12, type C8) that is used to classify assets into groups or families. You use this category code to further define the subclass codes.
szClassCode9	ACL9	char	OPT	BOTH
A user defined code (system 12, type C9) that is used to classify assets into groups or families. You use this category code to further define the subclass codes.
szClassCode0	ACL0	char	OPT	BOTH
A user defined code (12/CO) that groups similar items for billing. If you are an Equipment Management client and you use Equipment Billing, you must use this category code for rate group purposes only.
szCatagoryCodeFA	FA1	char	OPT	BOTH
A three digit category code that can be used for any purpose. You can then use this code to selectively extract specific assets from the Asset Master. Use UDC 12/F1 to view or change values for this category code.
szCategoryCodeFA2	FA2	char	OPT	BOTH
A three digit category code that can be used for any purpose. You can then use this code to selectively extract specific assets from the Asset Master. Use UDC 12/F2 to view or change values for this category code.
szCategoryCodeFA3	FA3	char	OPT	BOTH
A three digit category code that can be used for any purpose. You can then use this code to selectively extract specific assets from the Asset Master. Use UDC 12/F3 to view or change values for this category code.
szCategoryCodeFA4	FA4	char	OPT	BOTH
A three digit category code that can be used for any purpose. You can then use this code to selectively extract specific assets from the Asset Master. Use UDC 12/F4 to view or change values for this category code.
szCategoryCodeFA5	FA5	char	OPT	BOTH
A three digit category code that can be used for any purpose. You can then use this code to selectively extract specific assets from the Asset Master. Use UDC 12/F5 to view or change values for this category code.
szCategoryCodeFA6	FA6	char	OPT	BOTH
A three digit category code that can be used for any purpose. You can then use this code to selectively extract specific assets from the Asset Master. Use UDC 12/F6 to view or change values for this category code.
szCategoryCodeFA7	FA7	char	OPT	BOTH
A three digit category code that can be used for any purpose. You can then use this code to selectively extract specific assets from the Asset Master. Use UDC 12/F7 to view or change values for this category code.
szCategoryCodeFA8	FA8	char	OPT	BOTH
A three digit category code that can be used for any purpose. You can then use this code to selectively extract specific assets from the Asset Master. Use UDC 12/F8 to view or change values for this category code.
szCategoryCodeFA9	FA9	char	OPT	BOTH
A three digit category code that can be used for any purpose. You can then use this code to selectively extract specific assets from the Asset Master. Use UDC 12/F9 to view or change values for this category code.
szCategoryCodeFA0	FA0	char	OPT	BOTH
A three digit category code that can be used for any purpose. You can then use this code to selectively extract specific assets from the Asset Master. Use UDC 12/F0 to view or change values for this category code.
szCategoryCodeFA21	FA21	char	OPT	BOTH
A 10-digit category code that can be specified for any purpose. This code can then be used to selectively extract specific assets from the Item Master. See User Defined Codes, system 12, code 21 to view and/or change values for this category code.
szCategoryCodeFA22	FA22	char	OPT	BOTH
A 10 digit category code that can be used for any purpose. You can then use this code to selectively extract specific assets from the Asset Master. Use UDC 12/22 to view or change values for this category code.
szCategoryCodeFA23	FA23	char	OPT	BOTH
A 10 digit category code that can be used for any purpose. You can then use this code to selectively extract specific assets from the Asset Master. Use UDC 12/23 to view or change values for this category code.
szCategoryCodeCustomerProf	ZE01	char	OPT	BOTH
A user defined reporting code for equipment.
szCategoryCodeCustomerProf_2	ZE02	char	OPT	BOTH
A user defined reporting code for equipment.
szCategoryCodeCustomerProf_3	ZE03	char	OPT	BOTH
A user defined reporting code for equipment.
szCategoryCodeCustomerProf_4	ZE04	char	OPT	BOTH
A user defined reporting code for equipment.
szCategoryCodeCustomerProf_5	ZE05	char	OPT	BOTH
A user defined reporting code for equipment.
szCategoryCodeCustomerProf_6	ZE06	char	OPT	BOTH
A user defined reporting code for equipment. Enter a value from UDC 17/B6.
szCategoryCodeCustomerProf_7	ZE07	char	OPT	BOTH
A user defined reporting code for equipment.
szCategoryCodeCustomerProf_8	ZE08	char	OPT	BOTH
A user defined reporting code for equipment.
szCategoryCodeCustomerProf_9	ZE09	char	OPT	BOTH
A user defined reporting code for equipment.
szCategoryCodeCustomerProf_10	ZE10	char	OPT	BOTH
A user defined reporting code for equipment.
mnParentNumber	AAID	MATH_NUMERIC	OPT	BOTH
A parent number groups related components together. You can associate each item of property and piece of equipment with a parent item. For example, you can associate a mobile telephone with a specific automobile (the parent), a printer with a computer (the parent), or a flat bed with a specific truck chassis (the parent). Note: If this is a data entry field, the default value is the asset number. For example, if the asset number is 123, the system assigns 123 as the default parent number.
cActionCode	EV01	char	OPT	INPUT
An option that specifies the type of processing for an event.
szErrorMessageID	DTAI	char	OPT	OUTPUT
A code that identifies and defines a unit of information. It is an alphanumeric code up to 8 characters long that does not allow blanks or special characters such as %, &, or +. You create new data items using system codes 55-59. You cannot change the alias.
szDescription001	DL01	char	OPT	INPUT
A user defined name or remark.
cSuppressErrorMessages	EV01	char	OPT	INPUT
An option that specifies the type of processing for an event.
mnItemNumberShortKit	KIT	MATH_NUMERIC	OPT	BOTH
The system provides for three separate item numbers. 1. Item Number (short) - An eight-digit, computer assigned, completely non-significant item number. 2. 2nd Item Number - The 25-digit, free form, user defined alphanumeric item number. 3. 3rd Item Number - Another 25-digit, free form, user defined alphanumeric item number.

Related Functions

None

Related Tables

None